Our technicians have laid out the same data for other technicians at the following article. Drain Valves by Size and Voltage - For Technicians

Model numbers will also be added for reference, but the list may not be complete or accurate due to machine customization. Some Model numbers list more than one size drain valve in their service manual. Therefore, it is very important to know the size and voltage of the drain valve that needs to be replaced. For example, the service manual for model number 42032X7R lists part number 96D350A71 as well as 96D250A71. Customization of the machine determines which was shipped with the machine.

Drain valves are electrically opened and/or closed. Outlet valves that are actuated with pressurized air are called Dump Valves.
For a list of Dump Valves, click DUMP VALVES BY SIZE

2 INCH DRAIN VALVES

220 - 240 VOLT

36026X8J / 36026X8R / 36026X8W / 42026X7R / 42026X7J /  42032X7R / 42026X7W / 42032X7J / 42032X7W

PART NUMBER	DESCRIPTION	ADDITIONAL INFO
96D250A71	DRINVAL 2"N/O MTRDR240V 50/60C	.20 - .17 AMP

 

96D250B71

DRINVAL 2"N/C MTRDR240V 50/60C

.20 - .17 AMP

MCR09E5 / MCR12E5 / MCR16E5 / MWR09E5 / MWR12E5 / MWR12J5 / MWR12X5 /
MWR16E5 / MWR16J5 / MWR16X5 / MWT12E5 / MWT12J5 / MWT16E5 / MWT16J5 / MWT16X5

IMPORTED MACHINES

96D25RAA71

2005035A DRAINVALRTANG 2"N/O 240V 50/60

.24 AMP / RIGHT ANGLE (90°)

3 INCH DRAIN VALVES

FOR INFO ON SEAL REPAIR KITS FOR 3 INCH DEPENDO DRAINS, CLICK HERE

110 - 120 VOLT

36021C4E / 36021V5J / 36021V5Z / 36021V7J / 36021V7Z / 36026V5J / 36026V5Z / 36026V7J / 36026V7W / 36026V7Z /
42026V6J / 42026V6W / 42026V6Z / 42030V6J / 42030V6Z

96D350A37C

DRNVAL 3"N/O 120V50/60C W/COVER

.35 AMP

NOTE ON 96D350A37C: THIS PART IS THE SUBSTITUTE FOR PART NUMBER 96D350A37



 

UNITS WITH REUSE SYSTEM MAY ALSO HAVE THIS NORMALLY CLOSED DRAIN VALVE

96D350B37

DRAINVAL 3"N/C MTRDRV120V 50/6 W/COVER

.35 AMP

 

 

LEGACY 36" and 42" V Machines equipped with a 90° Dependo drain valve / 36026V5J / 36026V7J / 42026V6J

96D35RAA37

DRAINVAL RT-ANG 3" N/O 120V 50/60C W/COVER

.35 AMP

96D35RAA37 IS NO LONGER AVAILABLE.  SEE NOTE BELOW

NOTE: CUSTOMERS MUST PURCHASE THE RETROFIT KIT NUMBER KBKTMDDR01 WHICH USES A STRAIGHT DEPENDO DRAIN AND A 90 DEGREE HOSE CONNECTION FOR DRAIN TO REAR APPLICATIONS.

220 - 240 VOLT

30010CGE  / 30010G5E / 30010G5X / 30015C4A / 30015C4E / 30015CGE / 30015G5E / 30015G5X / 30015J4P / 30015M4G / 30015M4J / 30015M5J / 30015M6J / 30015Q4J / 30015T5E / 30015T5J / 30015T5X / 30015T6X / 30015V7J / 30015V8Z / 30015VRJ / 30015VZZ / 30020C4A / 30020M5G / 30020M4J / 30020M5J / 30020M6J / 30020M7J / 30022C4E / 30022F8J / 30022F8R / 30022F8S / 30022F8W / 30022H7J / 30022H8J / 30022J8P / 30022M4J / 30022M5J  / 30022M6J / 30022S4J / 30022S5G / 30022T5E / 30022T5X / 30022T6X / 30022V6J / 30022V8Z / 30022VRJ / 30022VZZ / 30022X8J / 30022X8R / 36026X8R / / 42026FV7 / 42026X7J / 42026X7R / 42026X7W / 42026XFJ / 42032X7J / 42032X7R / 42032X7W

Import models / MCR27E5 / MWF27J8 / MWF27Z8 / MWR27E5 / MWR27J5 / MWR27X5 / MWT27E5 / MWT27J5 / MWT27X5 / 42026X7J / 42026X7W / 42032X7J / 42032X7W / 30022X8J / 30022X8W / 36026X8J / 36026X8W

SEE NEXT TABLE AND PICTURE FOR 3015/22 UNITS MANUFACTURED AFTER JAN. 2016

96D350A71

DRINVAL 3"N/O MTRDR240V 50/60C DEPENDO

.20 - .17 AMP

 
NOTE ON 96D350A71: IF THE CUSTOMERS MACHINE IS AN AZ MODEL 36 OR 42X8J MACHINE ASK IF THE DRAIN VALVE IS AIR OPERATED. 
IF IT IS AIR OPERATED SELL 98CMCR3604. (ON THE AIR OPERATED DRAIN VALVE PAGE. LINK ABOVE)

30015T6X / 20015V8Z / 30015VRJ / 30015VZZ / 30022T6X / 30022V6J / 30022V8Z / 30022VRJ / 30022VZZ  MFG AFTER 01/2016

96D350A71A

DRAINVAL 3"N/O MTRDR240V 50/60C DEPENDO MDB-3 W/BYPASS

.20 - .17 AMP

 

UNITS WITH REUSE SYSTEM MAY ALSO HAVE THIS NORMALLY CLOSED DRAIN VALVE

96D350B71

DRINVAL 3"N/C MTRDR240V 50/60 W/COVER

.20 - .17 AMP

30022H7J / 30022H8J

96D350SA71

DRAINVAL 3" 240V50/60 SUDSPORT DEPEND-O #33021423

.20 - .17 AMP

 

MCR18E4 / MWR18E4 / MWR18J4 / MWR18J6 / MWR18X4 / MWR18X6 / MWT18E4 / MWT18J6 / MWT18X4

96D35RAA71	DRAINVAL RT-ANG 3" 240V 50/60C	.20 - .17 AMP

 

DEPENDO KITS TO REPLACE PINCH TUBE DRAIN ASSEMBLIES

SHOWN HERE

110 - 120 VOLT

KIT COMES WITH VALVE 96D350A37C

PART NUMBER	DESCRIPTION	ADDTIONAL INFO
KHCDV00137	PINCH TUBE TO DEPENDO-120V	.35 AMP

220 - 240 VOLT

KIT COMES WITH VALVE 96D350A71

KHCDV00171

PINCH TUBE TO DEPENDO-240V

.20 - 17 AMP

SOLENOID STILL AVAILABLE PART NUMBER 09K061D / SOLENOID 120V 60C #8940
(RETURN)