Featured Articles

Popular Articles

How do I size and wire a Buck Boost transformer

Milnor Article - October 24, 2018

Buck Boost transformers can help convert power available to the needed voltage for machinery. Multiple versions of buck/boost transformers are available to convert voltages available to differing machine requirements.

Video - Programming the Yaskawa V1000 Inverter

Milnor Article - November 13, 2018

Guide to programming the Yaskawa V1000 Inverter

Is my dip switch on or off?

Milnor Article - February 4, 2019

This guide will explain how to set dip switches.

What does the serial MTA Connector connect to?

Milnor Article - October 29, 2018

The devices in an automated system communicate through RS-485

Door Gasket Part Numbers for Washer Extractors

Milnor Article - October 22, 2018

Part number information for Washer extractor Door Gaskets by model #, machine age, and glass type.

Single Stage Press Hydraulic Circuit - Ram

Milnor Article - May 20, 2019

Explanation of the hydraulic press main ram circuit for the Single Stage Press

Processor Board Voltage Settings / Adjusting the Power Supply

Milnor Article - November 20, 2017

The voltage running to the processor is important to keep the processor board running properly. Set the voltage too high and strange things start to happen. Set the voltage too low and we have possible resetting issues.

How do I force recalibration for my MilTouch™ touchscreen?

Milnor Article - October 25, 2018

ELECTRIC INLET VALVES BY SIZE AND VOLTAGE

Milnor Article - August 17, 2018

a list of Water Inlet Valves arranged in ascending order in size and then voltage. Model #s are included in list but may not be accurate due to machine customization.

Bearing Kits by Model Number

Milnor Article - October 19, 2018

Find the bearing replacement kit needed by searching for machine model numbers. Also included are pulling fixture part numbers and additional helpful information.